Pallet Rack Safety Netting by Industrial Netting 800-326-4403
Rack Guard Pallet Rack Safety Netting from Industrial Netting protects people and reduces product damage in warehouses, stock rooms and other storage facilities. Unlike knitted and woven nets the joint structure of this extruded polypropylene grid retains the original hole size and resists sagging. You can easily trim rack guard safety netting to fit over sprinkler heads or other irregular shapes without losing the structural integrity of the mesh. It won’t fray or unravel if a joint or strand is cut.
Rack Guard Netting can be used for numerous tasks, including back of rack, safety net and end of aisle protection, shelf dividers and lighter duty box applications. But remember, it should only be used in vertical applications and never be considered as catch netting for people.
Installing Rack Guard Netting
Installing rack guard netting is pretty straightforward. All it takes is a tin snips and plastic ties. For best results. You’ll want to use cable ties that you’ve stabilized to maximum service life. The ties used in the video are rated at 175 pounds of tensile strength. To get started with installation. Place the rack guard roll on the floor parallel to the rack. Next, pull one end of the rack guard netting to the top of the rack and wrap the rack guard grid around the top beam, then use ties to secure the center and ends in order to hold the rat guard netting in place. Working from the top down, pull the netting snug as you go and install cable ties every four to six inches. Once the rat guard netting is secured, use tin snips to trim off any excess material. And that’s all there is to installing rack guard the best way to defend your products while protecting your people.
Rack Guard Netting is Available in Master Rolls,
Rack Guard Netting is available in master rolls but most prefer that we pre-cut to specific sizes at our factory for quicker and easier installation.